" GRW " 8921 GEARWRENCH TOOL PRODUCTS COMPANY

21-PIECE 3/8"-DRIVE SOCKET SET

UPC 82171089213

The Gear Ratchet handle quickly converts to a conventional 1/4-Inch or 3/8-Inch ratchet for standard sockets by using the two included adapters. "Pass through" socket system eliminates the need for deep sockets. The Vortex thin wall socket design has the same torque strength as an ordinary socket. Over all height is reduced by as much as 50-Percent, width by 20-Percent. The unique Gear Ratchet drive configuration increases torque strength by as much as 40-Percent and needs as little as 5º or arc. Chrome vanadium steel. Fully hardened. Features fine tooth 5º ratchet handle.

• Pass-thru sockets work when even deep sockets are too short
• A fine tooth ratchet and socket system that changes from a pass-thru system to a conventional ratchet handle with interchangeable 1/4-Inch and 3/8-Inch drives that allow for the use of standard sockets
• Up to 40-Percent stronger by eliminating drive tang and up to 50-Percent thinner than conventional ratchet systems
• SET CONSISTS OF:
  • 132120 (3/8" SOCKET)
  • 132140 (7/16" SOCKET)
  • 132160 (1/2" SOCKET)
  • 132180 (9/16" SOCKET)
  • 132200 (5/8" SOCKET)
  • 132220 (11/16" SOCKET)
  • 132240 (3/4" SOCKET)
  • 532100 (10-MM SOCKET)
  • 532110 (11-MM SOCKET)
  • 532120 (12-MM SOCKET)
  • 532130 (13-MM SOCKET)
  • 532140 (14-MM SOCKET)
  • 532150 (15-MM SOCKET)
  • 532160 (16-MM SOCKET)
  • 532170 (17-MM SOCKET)
  • 532180 (18-MM SOCKET)
  • 532190 (19-MM SOCKET)
  • 231060 (3" EXTENSION)
  • 231061 (0.89 ADAPTER)
  • 231062 (1.17 ADAPTER)
  • 3/8" HANDLE