" TBW " 7-HS TB WOODS
COUPLING INSERTS-TBW7HS>
Description
- J sleeves are molded EPDM rubber (E)
- H sleeves are molded Hytrel (H)—designed for high-torque applications, transmit four times as much power as an equivalent EPDM sleeve
- Available in one-piece solid construction (JE, H) or one-piece split construction (JES, HS)
- May be used in any Sure-Flex flange within a given size
- Hytrel sleeves can be used only with S, C and SC flanges, they cannot be used with J or B flanges or as direct replacements for EPDM sleeves
| Coupling Outside Diameter: | 4-11/32 in |
| Coupling Size Code: | 7 |
| Sleeve Type Code: | HS |
| Sleeve Construction: | Two Piece Split |
| Sleeve Material: | Thermoplastic Elastomer |
| Coupling Overall Length: | 2-3/16 in |
| Torque Capacity: | 2875 in·lb |
| Maximum RPM: | 5250 RPM |
| Horsepower @ 100 RPM: | 4.6 hp |
| Maximum Angular Misalignment: | 0.02 ° |
| Maximum Parallel Misalignment: | 0.012 in |
| Operating Temperature Range: | -65 to +250 °F |
| Series: | S-Flex |