| |
- J sleeves are molded EPDM rubber (E)
- H sleeves are molded Hytrel (H)—designed for high-torque applications, transmit four times as much power as an equivalent EPDM sleeve
- Available in one-piece solid construction (JE, H) or one-piece split construction (JES, HS)
- May be used in any Sure-Flex flange within a given size
- Hytrel sleeves can be used only with S, C and SC flanges, they cannot be used with J or B flanges or as direct replacements for EPDM sleeves
| Coupling Outside Diameter: |
5-1/16 in |
| Coupling Size Code: |
8 |
| Sleeve Type Code: |
HS |
| Sleeve Construction: |
Two Piece Split |
| Sleeve Material: |
Thermoplastic Elastomer |
| Coupling Overall Length: |
2-1/2 in |
| Torque Capacity: |
4530 in·lb |
| Maximum RPM: |
4500 RPM |
| Horsepower @ 100 RPM: |
7.2 hp |
| Maximum Angular Misalignment: |
0.025 ° |
| Maximum Parallel Misalignment: |
0.015 in |
| Operating Temperature Range: |
-65 to +250 °F |
| Series: |
S-Flex |
|
