" BLN " B-3100-8 B-LINE

BLN B-3100-8

8" PLAIN CLEVIS PIPE HANGERS

SLIDE-RITE™ CLEVIS HANGER FEATURES

PIPE WILL NOT "PINCH" WHEN INSTALLING

15° SWING IN EITHER DIRECTION ALLOWS PIPE TO EASILY FEED THRU

ENGINEERED DESIGN ALIGNS BOLT HOLES FOR QUICKER OVERHEAD INSTALLATION

Size Range: 1/2” (15mm) to 36” (900mm)

Material: Steel

Function: Recommended for the suspension of non-insulated pipe or insulated pipe with a B3151 shield.

Note: When an oversized clevis is used, a pipe spacer should be placed over the cross bolt to assure that the lower U-strap will not move in on the bolt. When attaching seismic bracing to the clevis hangers, a B3100PS (cross bolt spacer) must be installed. See Seismic Restraints Approval Guidelines. Order pipe sleeves Fig. 1CBS-(pipe size) separately.

Approvals: Included in our Seismic Restraints Catalog approved by the State of California Office of Statewide Health Planning and Development (OSHPD). For additional load, spacing and placement information relating to OSHPD projects, please refer to the B-Line/TOLCO Seismic Restraint Systems Guidelines. Underwriter's Laboratories Listed in the USA (UL) and Canada (cUL) for sizes 3/4” (20mm) thru 12" (300mm). Factory Mutual Engineering Approved (FM) for 3/4” (20mm) thru 12” (300mm) pipe. Conforms to Federal Specification WW-H-171E & A-A-1192A, Type 1 and Manufacturers Standardization Society ANSI/MSS SP-69 & SP-58, Type 1. Also available to accommodate rod schedule per per National Fire Protection Association (NFPA) Pamphlet 13.

Maximum Temperature: 650°F (343°C).

Standard Finish: Plain, Electro-Galvanized, DURA-GREEN™, or Hot-Dip Galvanized also available in Stainless Steel