Back to: GASKET SEALER

" RAD " T-7-03-V RADIATOR SPECIALTY

PrintEmail
RED SILICONE SEALANT-RADT703V>
Description

RAD T-7-03-V

RED SILICONE SEALANT

 

RED SILICONE RTV GASKET is a room temperature vulcanizing sealant for bonding, waterproofi ng and insulating most materials. Cures in 1 hour. Fully cures in 24 hours. Replaces any shape or size cork, asbestos, felt, rubber, paper or metal gasket in minutes. Bonds to metal, plastics, glass, vinyl, rubber, leather, fabrics, wood, tile and ceramics. Indea for hundreds of sealing applications in the home or shop. Meets GM Specifi cation 9985985.

APPLICATIONS: • Oxygen Sensor-Safe • Temp Up To 600°F • Pressure Resistant

DIRECTIONS: 1. Surfaces to be sealed must be clean and thoroughly dry. 2. Remove cap and pierce tube seal with probe in top of cap. 3. Attach nozzle and cut a small portion of tip at head. 4. After application, allow 5-10 minutes for silicone to “skin,” then assemble parts. 5. After use, remove nozzle and replace cap to provide an airtight seal. 6. Excess cured sealant may be trimmed with a razor blade. NOTE: Not recommended for cylinder head gasketing or uses involving continuous contact with gasoline or other solvents.

DANGER: ON CONTACT. UNCURED GASKET MATERIAL CAUSES IRRITATION. Material releases acetic acid during cure. In case of contact with eyes, fl ush with water for 15 minutes. Remove from skin with a dry cloth or paper towel. If swallowed, do not induce vomiting.

KEEP AWAY FROM CHILDREN AND ANIMALS