" RIG " 26132 RIDGID/RIDGE TOOL PRODUCTS

#711 UNIVERSAL DIE

Threads 1/4"-2" pipe at 36 RPM and 2 1/2"-4" at 12 RPM.

The 1224 threads a wide range of pipe including black, galvanized and plastic-coated pipe, together with stainless steel, IMC and heavy-wall conduit, as well as rod up to 30 Rockwell C.

          An induction motor insures sound levels well within the limits set by the regulating authorities.

          A special capacitor-start / capacitor-run motor allows the 1224 to thread a full range of material where voltage drop is experienced.

          1/4"-2" Universal Die Head; 2 1/2"-4" receding die head allows cutting of tapered or straight NPT/NPSM or BSPT/BSPP threads.

          Constant and proper lubrication of dies and work piece with through-head oiling.

          Approved by CSA (115V only).

Specifications

          Pipe Capacity:       1/4"-4" (6mm-100mm) 4"-6" (100mm-150mm) with 161 Geared Threader.

          Bolt Capacity:        1/4"-2" (6mm-50mm).

          Motor: 1 1/2 HP, single-phase, 60 Hz or 50 Hz, induction type.

          Motor Control:        Reverse/Off/Forward, heavy-duty rotary-type and integral foot switch.

          Spindle Speed:       36/12 RPM.

          Gear Box:     Two-speed gear box 3:1 ratio.

          Chuck:         Hammer-type with replaceable rocker-action jaw inserts.

          Rear Centering Device:    Cam action.

          Cutter:         Model 764 full-floating, self-centering 1/4"-4" with F-229 cutter wheel.

          Reamer:       Model 744, 1/4"-4" blade-type.

          Oiling:

          Pump:          Self-priming, gerotor-type, automatic-reversing, constant-flow.